Copyright © 2024 SPECIAL METALS. All Rights Reserved.
Special Metals is a renowned supplying industry featuring various industry products, including SMO 254 fittings. A fitting can be used in various pipe systems for connecting straight pipe or tubing sections to adopt different shapes and sizes.
Properties of SMO 24 fittings provide:
Various fittings made from SMO 254 materials exhibit exceptional properties. It demonstrates outstanding resistivity to pitting, also its resistance to crevice corrosion, stress cracking, and erosion fatigue uniform. In addition, it has the ability to provide stability at greater temperatures. These fittings can be available in different sizes. These fittings are highly resistant to the highest temperature, corrosion, and acids.
Fittings can be available in various forms: Elbow, Tees, Cross, Cap, Reducers, Collars, and Bends. Elbow fitting ensures consistency.
Table of Content
- What is SMO 254 Fittings
- SMO 254 Fittings Specifications
- ASTM A182 / B403 SMO 254 Fittings Equivalent Grades
- SMO 254 Fittings Types
- SMO 254 Fittings Dimensions
- 254 SMO Fittings Dimensional Tolerance
- Chemical Composition of SMO 254 Fittings
- Mechanical Properties of SMO 254 Fittings
- Ready Stock of SMO 254 Fittings in India
- SMO 254 Fittings Application Industries
- People Also Searched for
What are the Types of SMO 254 fittings?
SMO 254 elbow fitting:
Install these fittings in between two lengths of pipe to change the direction of the tube. These SMO 254 elbow fitting can be available as 180 degrees, 45 degrees, 90 degrees in 1D, 1.5D, 2D,3D,5D,6D,8D,10D radius as short and long radius.
SMO 254 return bend fitting:
Bends are the same to elbows with different bending radius. These elbows can be available in extended radius return bends, and short radius return bends.
SMO 254 pipe cross fitting:
These fittings can be used in industries for offering leaking-proof and torque-free sealing in any pipeline.
SMO 254 cap pipe fittings:
These cap pipe fittings are used in industries to block the end of a line in the industrial piping system.
SMO 254Tee pipe fittings:
These pipes are widely used in industrial piping systems to merge or divide fluids without needing a particular tubing system before installation. In addition, these SMO 254 fittings can be available in different specifications.
SMO 254 pipe reducer:
In these fittings, reducers are used as eccentric reducers, concentric reducers, and conical reducers.
SMO 254 pipe coupling:
These coupling fittings can be used for merging two equal ends in a piping system. We supplied couplings as half coupling and full coupling.
Uses:
Fittings can also be used for regulating fluid flow. For example, SMO 254 fittings are used in piping systems for changing direction or function, that is, mechanically joined the piping system. These fittings can be manufactured and finished as per the standards.
Standards : ASTM A182/ ASME SA182, ASTM B403/ ASME SB403
Size : ½"NB – 24"NB
Dimensions : : ASME/ANSI B16.9, ASME B16.28, MSS-SP-43, BS4504, BS4504, BS1560, BS10
ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
ANSI B 16.5, BS 1560. BS 10, IS 6392, B-2.1 NPT, API, DIN, JIS. MSS SP 44
Thickness : SCH10, SCH20, SCH30, STD SCH40, SCH60, XS, SCH 80, SCH 100, SCH 120, SCH 140, SCH 160, XXS available with NACE MR 01-75
Type : Seamless / Welded / Socketweld / Threaded / Fabricated
Pressure Rating : Threaded End-2000lb/ 3000lb/ 6000lbs
Socket-weld End-3000/ 6000/ 9000lbs
Thread Type : NPT, BSPT, BSPP
Bending Radius : R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom
| STANDARD | WERKSTOFF NR. | UNS | JIS | SIS | GOST | AFNOR | EN |
| SMO 254 | 1.4547 | N07718 | – | 2378 | – | Z1 CNDU 20.18.06Az | X1CrNiMoCuN20-18-7 |
| Nominal Pipe Size | All Fittings | All Fittings | All Fittings | Elbows/ Tees | 180° Return Bends | 180° Return Bends | 180 Deg Return Bends | Reducers | Caps |
|---|---|---|---|---|---|---|---|---|---|
| NPS | O.D. at Bevel (1), (2) | I.D. at End (1), (3), (4) | Wall Thickness (3) | Centre-to-End Dimension A,B,C,M | Centre-to-Centre O | Back-to-Face K | Alignment of Ends U | Overall Length H | Overall Length E |
| ½ to 2½ | 0.06 -0.03 | 0.03 | Not less than 87.5% of nominal thickness | 0.06 | 0.25 | 0.25 | 0.03 | 0.06 | 0.12 |
| 3 to 3 ½ | 0.06 | 0.06 | Not less than 87.5% of nominal thickness | 0.06 | 0.25 | 0.25 | 0.03 | 0.06 | 0.12 |
| 4 | 0.06 | 0.06 | Not less than 87.5% of nominal thickness | 0.06 | 0.25 | 0.25 | 0.03 | 0.06 | 0.12 |
| 5 to 8 | 0.09 -0.06 | 0.06 | Not less than 87.5% of nominal thickness | 0.06 | 0.25 | 0.25 | 0.03 | 0.06 | 0.25 |
| 10 to 18 | 0.16 -0.12 | 0.12 | Not less than 87.5% of nominal thickness | 0.09 | 0.38 | 0.25 | 0.06 | 0.09 | 0.25 |
| 20 to 24 | 0.25 -0.19 | 0.19 | Not less than 87.5% of nominal thickness | 0.09 | 0.38 | 0.25 | 0.06 | 0.09 | 0.25 |
| 26 to 30 | 0.25 -0.19 | 0.19 | Not less than 87.5% of nominal thickness | 0.12 | … | … | … | 0.19 | 0.38 |
| 32 to 48 | 0.25 -0.19 | 0.19 | Not less than 87.5% of nominal thickness | 0.19 | … | … | … | 0.19 | 0.38 |
| Tolerance | 90 Deg And 45 Deg Elbows And Pipe Tee |
Reducer (Concentric/ Eccentric) & Lap Joint Stub End (Long / Short) |
Pipe End Caps | |||
|---|---|---|---|---|---|---|
| Normal Pipe Size (NPS) Of ASME B16.9 | O. (Outside) D. (Daimeter) at Bevel |
I. (Inside) D.(Daimeter) at End |
Wall Thickness Of T | Center-to-End Dimension A ,C ,B |
Over-all Length Of H |
Over-all Length Of F |
| 1/2 to 2-1/2 | +0.06 | Not less than 87.5% of nominal thickness |
+/- 0.06 | +/- 0.06 | +/- 0.12 | |
| -0.03 | ||||||
| 3 to 3-1/2 | +/- 0.06 | +/- 0.06 | +/- 0.06 | +/- 0.06 | +/- 0.12 | |
| 4 | +/- 0.06 | +/- 0.06 | +/- 0.06 | +/- 0.06 | +/- 0.12 | |
| 5 to 8 | +/- 0.06 | +/- 0.06 | +/- 0.06 | +/- 0.06 | +/- 0.25 | |
| 10 to 18 | +0.16 | +/- 0.12 | +/- 0.09 | +/- 0.09 | +/- 0.25 | |
| -0.12 | ||||||
| 20 to 24 | +0.25 | +/- 0.19 | +/- 0.09 | +/- 0.09 | +/- 0.25 | |
| -0.19 | ||||||
| 26 to 30 | +0.25 | +/- 0.19 | +/- 0.12 | +/- 0.19 | +/- 0.38 | |
| -0.19 | ||||||
| 32 to 48 | +0.25 | +/- 0.19 | +/- 0.19 | +/- 0.19 | +/- 0.38 | |
| -0.19 | ||||||
| Grade | % | Ni | Cr | Mo | Cu | N | C | Mn | Si | P | S |
| SMO 254 | Min. | 17.5 | 19.5 | 6 | 0.5 | 0.18 | – | – | – | – | – |
| Max. | 18.5 | 20.5 | 6.5 | 1 | 0.22 | 0.02 | 1 | 0.8 | 0.03 | 0.01 |
| Grade | Tensile Strength (MPa) | Yield Strength (0.2%Offset)(MPa) | Elongation % min. |
| SMO 718 | Psi – 1,35,000 , MPa – 930 | Psi – 75,000 , MPa – 482 | 45% |
| 254 SMO Seamless Fittings | SMO UNS S31254 Fittings |
| SMO 254 Fittings | SMO 254 Industrial Fittings |
| SMO 254 Pipe Fittings Suppliers | ASTM B403 254 SMO High Pressure Fittings |
| SMO 254 Screwed Fittings | 254 SMO Bushing Stock |
| ASTM A182 SMO 254 90 Degree Elbow | 254 SMO Pipe Bend Supplier |
| SMO 254 Pipe Nipple Supplier | Type 254 SMO Coupling |
| 254 SMO 90 Degree Long Radius Elbow | SMO 254 Long Radius Elbow Stockists |
| SMO 254 Short Stub End Suppliers | UNS S31254 SMO Short Radius Elbow |
| Gr 254 SMO Reducing Elbow Suppliers in Mumbai | SMO 1.4547 Fittings Exporter |
| ASME B16.11 SMO 254 Forged Fittings in India | 254 SMO NPT Threaded Cap |
| ANSI B16.9 SMO 254 Butt weld Fittings | SMO 1.4547 High Pressure Forged Pipe Fittings |
| SMO 1.4547 Half Coupling Exporter | SMO 254 Buttweld Pipe Fittings |
| SMO 254 Plug | SMO 254 Hex Head Bushing |
| SMO 254 Socket weld Fittings Dealer | SMO 254 Welded Fittings Stockist |
| 254 SMO Short Stub End | SMO 254 Fittings Supplier in India |
| SMO 254 Piggable Bend Supplier in Mumbai | SMO 254 Coupling Manufacturer in India |
| SMO 1.4547 45 Deg Screwed-Threaded Elbow | SMO 254 Welding Boss |
| SMO 254 NPT Threaded Elbow | Suppliers of 254 SMO Fittings |
| ASME SB403 SMO 254 Adapter | ASTM A182 254 SMO Butt weld Fittings at Best Price |
254 SMO buttweld (welded) fittings distributor in mumbai india, SMO 254 fittings stockist in india, cost of 254 SMO fitting, SMO 254 fittings exporter, SMO 254 bushing price, SMO 254 forged fittings manufacturers in mumbai, SMO 254 seamless fitting stockholder in india, SMO 254 reducer price list manufacturer in mumbai, price of SMO fitting 718, SMO 254 fittings price, SMO 254 fittings manufacturer in india, SMO 254 socket weld fitting price, SMO 254 pipe fittings manufacturer in mumbai, SMO® SMO 254 industrial fittings dealer in mumbai india, SMO® SMO 254 fitting price, SMO 254 fitting supplier in gulf, 254 SMO fitting supplier in mumbai, types of 254 SMO butt weld pipe fitting, SMO 254 socket weld fittings thickness in mumbai, SMO® SMO 254 fittings mechanical properties, 254 SMO fitting suppliers in moscow, 254 SMO forged fittings price list in india, SMO 254 welded fittings standard, SMO 254 welded fittings supplier in europe, SMO 254 threaded fitting price list in mumbai, 254 SMO fittings equivalent grades, 254 SMO union suppliers, SMO® SMO 254 industrial forged fittings dealer in india, SMO 254 fittings supplier in india, 254 SMO threaded fitting pdf, SMO 254 fittings, SMO 254 fittings chemical composition, SMO 254 stub end supplier in mumbai india, SMO 254 fittings catalogue, SMO® SMO 254 industrial fittings dealer, type 254 SMO socket weld fittings, SMO 254 fittings price list, 254 SMO pipe cap suppliers in india, SMO 254 plug price list in india, SMO 254 seamless pipe fittings supplier in india.
125, C.P. TANK ROAD, NEAR MADHAVBAUG TEMPLE, SHOP NO 10, MUMBAI - 400004 , INDIA
Copyright © 2024 SPECIAL METALS. All Rights Reserved.
125, C.P. TANK ROAD, NEAR MADHAVBAUG TEMPLE, SHOP NO 10, MUMBAI - 400004 , INDIA
Copyright © 2024 SPECIAL METALS. All Rights Reserved.
