Copyright © 2021 SPECIAL METALS. All Rights Reserved.
Special Metals is a manufacturer and provider of ALUMINIUM ALLOYS 2014 PLATE. We offer an extensive range of these plates with specifications and standards. It is fine produced with aluminium alloy grade 2014 with various sizes, shapes and thicknesses. We manufacture these plates according to global quality standards as per requirement. These are widely accepted in aerospace and heat treating industries due to their lightweight, strength and excellent working.
ALUMINIUM ALLOYS 2014 is aluminium alloy enhancing Aluminium Metal properties with the addition of Copper, Silicon, Magnesium, Chromium and Manganese etc. Thus it is a stronger alloy with improved corrosion resistive properties. Moreover, it is good at low temperatures where strength is increased at subzero levels of temperatures.
What are the basic features of ALUMINIUM ALLOYS 2014?
ALUMINIUM ALLOYS 2014 PLATE is an excellent quality plate formed with aluminium alloy. It is recommended in lightweight and corrosive applications. Whereas Chromium addition increases resistance properties of alloy material, and hence these plates are immune to corrosions. It is basically non-magnetized plates used for constructional purposes. It is obtained in various thicknesses and hardness in various use. Electrical and thermal conductivity tends to use these plates in electrical and thermal systems.
ALUMINIUM ALLOYS 2014 PLATE is tempered with various methods and surface finish like polished, Bright, hair line, sand blast, brush, chequered, embossed type. We offer lower market cost with excellent durable and strong plates. Its hardness is also dependent on use in multiple applications. Higher rates of heat exchange are more appropriate for these plates in higher temperatures for thermal conductive components. It shows excellent weldability with proper arc and resistance welding techniques. It is oxidation resistant, and some plates are coated with thin chromium layers to avoid corrosion. The density of the material is less than steel grades. Thus it benefits to lighten the system with excellent features. This grade is most commonly preferred plate in various tempers and forms such as Hot-Rolled Plate, Cold-Rolled Plates, Chequered Plates etc.
ALUMINIUM ALLOYS 2014 PLATE is suitably used in:
|European Standard||BS (OLD)||WNr||UNS||ISO||USA (AA)||GERMANY (DIN)||IS||Canadian|
|Dimension (mm)||KG P/M2|
|0.5 X 1000 X 2000||4.5|
|0.7 X 1219 X 3048||6.3|
|0.9 X 1219 X 3048||8.1|
|1.2 X 1219 X 3048||10.8|
|1.6 X 1200 X 3048||14.4|
|2.0 X 1219 X 3048||18.0|
|3 X 1200 X 3000||27.0|
|3.18 X VARIOUS ANN||28.6|
|Thickness||Plate Weight per Unit Area||Density|
|3/16 inches||0.06000 lbs/in²42.184176 kg/m²||0.315 lbs/in³8.72 g/cm³|
|1/4 inches||0.08 lbs/in²56.245568 kg/m²||0.315 lbs/in³8.72 g/cm³|
|3/8 inches||0.121 lbs/in²85.0714216 kg/m²||0.315 lbs/in³8.72 g/cm³|
|1/2 inches||0.161 lbs/in²113.1942056 kg/m²||0.315 lbs/in³8.72 g/cm³|
|5/8 inches||0.196 lbs/in²137.8016416 kg/m²||0.315 lbs/in³8.72 g/cm³|
|3/4 inches||0.235 lbs/in²165.221356 kg/m²||0.315 lbs/in³8.72 g/cm³|
|7/8 inches||0.274 lbs/in²192.6410704 kg/m²||0.315 lbs/in³8.72 g/cm³|
|1 inches||0.313 lbs/in²220.0607848 kg/m²||0.315 lbs/in³8.72 g/cm³|
|1 1/4 inches||0.391 lbs/in²274.9002136 kg/m²||0.315 lbs/in³8.72 g/cm³|
|1 1/2 inches||0.47 lbs/in²330.442712 kg/m²||0.315 lbs/in³8.72 g/cm³|
|1 3/4 inches||0.549 lbs/in²385.9852104 kg/m²||0.315 lbs/in³8.72 g/cm³|
|2 inches||0.627 lbs/in²440.8246392 kg/m²||0.315 lbs/in³8.72 g/cm³|
|2 1/4 inches||0.705 lbs/in²495.664068 kg/m²||0.315 lbs/in³8.72 g/cm³|
|2 1/2 inches||0.784 lbs/in²551.2065664 kg/m²||0.315 lbs/in³8.72 g/cm³|
|2 3/4 inches||0.862 lbs/in²606.0459952 kg/m²||0.315 lbs/in³8.72 g/cm³|
|3 inches||0.941 lbs/in²661.5884936 kg/m²||0.315 lbs/in³8.72 g/cm³|
|2014 (min) (max)||Balance||0.50 – 0.90||0.0 – 0.50||3.90 – 5.00||0.0 – 0.25||0.40 – 1.20||0.20 – 0.80||0.0 – 0.15||0.0 – 0.15||0.0 – 0.10||0.0 – 0.10||0.0 – 0.20||0.0 – 0.05|
|Alloy||Temper||Yield Strength (Mpa)||UTS (Mpa)||Elongation (%)|
|–||–||Minimum||Maximum||Minimum||Maximum||A 50mm (Minimum)|
|Aluminium Alloy UNS A92014 Plates Dealer||Aluminium 2014 Plates Stockist|
|Aluminium Alloy 2014 Plates||2014 Aluminum Alloy Hot Rolled Plates|
|2014 Aluminium ASME SB209 Plate||Aluminum 2014 Plate Supplier in India|
|ASME SB209 Aluminum 2014 Plates||ASTM B209 2014 Aluminium Plates at Best Price|
|Hot-Rolled Aluminium Alloy A92014 Plates||2014 Aluminum Plate Stock|
|Aluminium Alloy 2014 ASTM B209 Plates||5mm Thickness Aluminum 2014 Plate|
|Aluminium Alloy 2014 ASME SB209 Plates||2014 Aluminium Alloy Hot Rolled Plates|
|Aluminum Alloy 2014 Plates Supplier||Aluminium Alloy 2014 Plates Stockist in Mumbai|
|2014 Aluminum Cold Rolled Plate||2014 Aluminium Plate in India|
|Gr 2014 Aluminium Plate Suppliers in Mumbai||Aluminium Alloy 3.1255 Plates Exporter|
|Aluminium Alloy 2014 ASTM B209 Plates Distributor||UNS A92014 Aluminium CR Plates|
|Aluminum 3.1255 Plate Cut To Size||Aluminium Alloy 2014 Customized Plates|
|Aluminum Alloy 2014 ASTM B209 Plate in Mumbai||HR Aluminium Alloy 2014 Plates|
|ASTM B209 Aluminium 2014 Plate Stockist In India||Suppliers of Aluminium Alloy Plate Grade 2014|
|Aluminum 2014 HR Plate||Aluminium Alloy 2014 Plate Stockists|
|Aluminum 2014 Plates Supplier in Mumbai||Aluminium 2014 Plates Trader in India|
Copyright © 2021 SPECIAL METALS. All Rights Reserved.